b 7200 clutch fork off set
rgpbeme
Join Date: Mar 2006 Posts: 55 Eureka Springs AR |
2007-01-14 138803
I have rebuilt the clutch in my b 7200 I got a new clutch fork. The old one has a off set from the c line of the shaft it mounts on a little foward of backward depending on which way it is mounted. The Kubota manual says watch the way or direction it is mounted when you take it out.
The new fork is almost straight with the shaft mount and seems to have a very small set if any. Does anyone know which way the off set goes or if there is a off seton the fork.
Reply to | Quote Reply | Add Photo
b 7200 clutch fork off set
kubota6200
Join Date: Aug 2005 Posts: 17 Central Ohio |
2007-03-03 140156
My Kubota B5200,B6200 & B7200 Workshop Manual,page M.1.1, illustration 0319F018, indicates a slight bump or crown on the rear mating surfaces of the Clutch Release Fork legs. The crown should be facing toward the transmission or rear of the assy. Check the illustration in the WSM carefully. ....
Reply to | Quote Reply | Add Photo
Go Top
Share This